Choose the type of the problem, enter the known quantities (units can be typed right into the field) and leave empty the one to find. The calculator solves it in the school form Given, SI, Solution, Answer and plots the dependence. For the university level, the theorem on the change of the kinetic energy of a system, there is a separate calculator.
Work of a force
The work of a constant force F over the displacement s is A = F s cos α, where α is the angle between the force and the displacement. The unit is the joule: 1 J = 1 N·m. A force along the motion (α = 0) does positive work, against the motion (α = 180°) negative work, a perpendicular force does no work: so the weight on a horizontal path and the normal force do no work. Pulling a load by a rope at 60° over 5 m with 20 N is A = 20 × 5 × 0.5 = 50 J.
Power and efficiency
Power is the work per unit time: N = A / t. For a body moving at speed v under a constant force F along the motion, N = F v. The unit is the watt: 1 W = 1 J/s; 1 metric horsepower = 735.5 W. A crane lifting 3 t by 10 m in 30 s develops N = 3000 × 9.8 × 10 / 30 = 9.8 kW. The efficiency is η = A_u / A_t (multiply by 100 for per cent). It is always below 100 %.
Kinetic and potential energy
| Energy | Formula | Example |
|---|
| Kinetic | E_k = m v² / 2 | 1000 kg at 20 m/s: 200 kJ |
| Potential in gravity | E_p = m g h | 2 kg at 5 m: 98 J (g = 9.8) |
| Elastic | E_p = k x² / 2 | k = 100 N/m, x = 10 cm: 0.5 J |
Conservation of energy
Without friction and drag the sum of the kinetic and potential energy does not change: m v₁²/2 + m g h₁ = m v₂²/2 + m g h₂, the mass cancels. A sledge from rest at the top of a 5 m hill arrives at the bottom with v = √(2 g h) = 9.9 m/s. A ball thrown up at 20 m/s rises to h = v²/(2g) = 20.4 m. A pendulum of length l released from the angle α passes the lowest point with v = √(2 g l (1 − cos α)). With friction part of the energy becomes heat: E₁ = E₂ + A_fr.
University level
For a system of bodies with constraints (pulleys, rollers, springs) the theorem on the change of the kinetic energy of a system is used; see the kinetic energy calculator of the theoretical mechanics course.
FAQ
How to find the work of a force that acts at an angle to the displacement?
A = F s cos α. Only the component of the force along the displacement works. At α = 60° the work is half of F s, at 90° it is zero, above 90° it is negative. Enter the angle in degrees: the calculator takes the cosine.
What is the difference between power and work, and how to find the power from the speed?
Work is measured in joules, power in watts: it is the work per second, N = A/t. For a constant force along the motion N = F v: an engine pulling with 1500 N at 20 m/s develops 30 kW. The mode Power has both formulas.
How to find the efficiency?
Divide the useful work by the total work, η = A_u / A_t, and give it in per cent. A useful work of 800 J from a total of 1000 J is an efficiency of 80 %. It cannot exceed 100 %, otherwise the data are wrong.
How to find the speed of a body at the bottom of a slide?
By conservation of energy v = √(v₁² + 2g(h₁ − h₂)); from rest at the height h it is √(2gh) and the mass is not needed. With friction subtract 2 A_fr/m under the root. The mode Conservation of energy does it and shows a table of the energies at the start and at the end.
How does this page differ from the kinetic energy calculator of theoretical mechanics?
Here there is one body and school formulas. The university theorem on the change of the kinetic energy of a system in theoretical mechanics works for systems with pulleys, rollers and springs and accounts for moments of inertia and the work of internal forces. The link is in the block Need more.